V Series-cartridge
V Series-cartridge
产品手册High Performance Intravane Pumps for plastic injection machinery,Shoe machinery,Tool machinery,Die casting machinery and Metal I urge equipment.
1.Intravane pumps with hydraulic balancing structure provide more stable performance and longer life since less pressure from vaneon stator
2.Twelve vane system provide low amplitude flow pulsation resulting in low system noise characteristics.
3.Verious displacement and shafts with 4 different outlet opposite position make operation more flexible.
4.The cartridge is independent of the drive shaft,allowing for easy servicing without remore the pump from its mounting.
| (F3-) | PC- | 25V | 19 | R | 10 |
| Note | Cartridge mark | Series | Flow code | Rotation | Design number |
| No-marking: Petroleum series oil emulsification fluid waler glycol-fluid phosphate ester fluid |
Cartridge kit of single pump double pump shaft end Cartridge kit of double pump cover end |
20v | 2,3,4,5,6,7,8,9, 10,11,12,14 |
(Viewed from shaft end of pump) Left hand for counter clockwise Right hand for clockwise |
10 |
| 25V | 10,12,14,15,17, 19.21,25 |
||||
| 35v | 21,25,30,32,35, 38,45 |
||||
| 45V | 42,45,5O,57,60, 66,75 |
| NO. | Part | Qty | |||||
| 1 | Pin | 2 | |||||
| 2 | sliding bearing | 1 | |||||
| 3 | cross pan head bolts | 2 | |||||
| 4 | inlet support plate | 1 | |||||
| NO. | Part | Qty | |||||||
| 5 | cam ring | 1 | |||||||
| 6 | vane kat | 12 | |||||||
| 7 | Rotor | 1 | |||||||
| 8 | outet support plate | 1 | |||||||
| NO. | Part | Qty | |||
| 9 | Retainer | 1 | |||
| 10 | O ring | 1 | |||
| 11 | Rotainer | 1 | |||
| Series | ∅A | B | C | ∅D | E | ∅F | ∅G | H | K | M Gasket | M O-Ring | ||||||||||||||
| 20v | 82.55 | 81.5 | 70.1 | 47 | 61.5 | 4.8 | 76.2 | 7 | 73.6 | 82.76x76.26x3.5 | 40x3.55 | ||||||||||||||
| 25V | 96.8 | 98.8 | 87 | 52,2 | 71.2 | 4.8 | 90.5 | 7 | 88.19 | 97x91x3.5 | 44x3.53 | ||||||||||||||
| 35v | 114.3 | 117.7 | 105 | 72.2 | 90.3 | 6.4 | 108 | 8 | 103.94 | 114.5x108.5x3.5 | 63.09x3.53 | ||||||||||||||
| 45V | 133.35 | 141.1 | 129.6 | 80.2 | 105.5 | 6.4 | 127 | 8 | 123.8 | 133.6x127.6x3.5 | 71x3.55 | ||||||||||||||
| Serlies | Inside spline tooth outline paramenter of rotor | ||||||||||||||||||||||||
| Numberof teeth | Pitch | pressure angle | Major Diameter Minor Dlameter | ||||||||||||||||||||||
| 20V | 30 | 48/96 | 45R | 16.617 | 15.56 | ||||||||||||||||||||
| 25V | 40 | 48/96 | 45° | 21.9 | 20.86 | ||||||||||||||||||||
| 35V | 37 | 40/80 | 45° | 24.38 | 23.1 | ||||||||||||||||||||
| 45V | 14 | 12/24 | 30° | 32.59 | 27.6 | ||||||||||||||||||||
